Part List - Costway BB5693 Manual Del Usuario

Part list

Seat (with cloth
Tray x1
cover ) x1
Legs x4 Feet x4
String bag x1 Foot pad x1
Stage 1: Assemble the chair
Follow the Figl, please place the
seat holder at the bottom of the seat
correctly and tighten the screws.
Note: the bottom hole should be
aligned with the cross band hole, as
shown by the red arrow.
Table x1 Game table x1
Play center seat
(with cloth cover) Table cover x4
x1
Bottom of chair M4x16mm
x1 Screw x6
Fig. 1
04
Stage 2: Assemble the chair feet
Follow the Fig 1, insert the upper leg into the base holder. Please note that
each of the four legs has a spring-loaded pin. Line up the seat base, so that the
small hole on the base holder lines up with the pin. Push firmly on the upper
leg at either end until each of the spring-loaded pins click into place within
the small hole in the base holder as Fig 2. Repeat for other legs. The finished
part as showed in the Fig 3.
Fig. 1
Stage 3: Assemble the table feet
Follow the Fig 1, insert the upper leg into the base holder. Please note that
each of the four legs has a spring-loaded pin. Line up the seat base, so that the
small hole on the base holder lines up with the pin. Push firmly on the upper
leg at either end until each of the spring-loaded pins click into place within
the small hole in the base holder as Fig 2. Repeat for other legs. The finished
part as showed in the Fig 3.
Fig. 1
Fig. 2 Fig. 3
Fig. 2 Fig. 3
05