Costway MU10071 Manual Del Usuario página 8

Step 10: Tighten the thin metal upper pull rod
into the base of the Hi Hat Stand. After you've
done this, place the upper tube over the top of
this pull rod and down into the base of the stand.
Simply tighten down the T-rod located at the top
of the case of the stand to hold the upper tube in
place.
Step 11: Now you're ready to place the Hi Hat
cymbals (23) onto the Hi Hat stand. Remove the
bottom stop nut, metal washer and felt washer
from the Hi Hat clutch and insert the clutch thru
the top Hi Hat cymbal.
Step 12: Place the other felt thru the bottom of
the clutch and make it is in contact with the
bottom of cymbal. Then place the metal washer
provided onto the felt and tighten the stop nut
onto the clutch and against the washer.
07