3
First align one of Side Panel with the holes on the two End Panels and
fix them with screws. Don't tighten too much until the last step is completed.
4
Align and insert the Play Field with slots of the End Panels on both
sides until it snaps into the slot in the Side Panel.
5
Pass the Player Teams with the same
uniform through the Side Panel holes
at intervals as shown in the figure.
Pass the other end of the Player Teams
through the corresponding holes of the
other Side Panel, aligning the screw holes
and locking the screws.
Turn the table over to align the
two ends of the Batten with the
screw holes and lock the screws.
06