Decolav 9031 Serie Manual Del Usuario

Product Description - Roughing-in Dimensions
Installation Notes
•
Prepare Countertop by drilling a 1 3/4" (4.445cm) diameter drain hole at desired location.
•
Remove Drain Nut and Drain from Mounting Stand.
•
Insert Mounting Stand into Countertop's drain hole.
•
Apply Teflon to the exposed male threading of Mounting Stand.
•
Thread Drain Nut onto Mounting Stand to secure to Countertop.
•
Place Thick Washer into top groove of Mounting Stand.
•
Place Lavatory on Mounting Stand.
•
Apply Teflon to the exposed male threading of Drain.
•
Thread Drain into Mounting Stand to secure Lavatory.
•
NOTE: DO NOT OVERTIGHTEN DRAIN!
•
If needed, trim off excess Tailpiece for appropriate length.
•
Apply Teflon to exposed male threading of Tailpiece and tighten.
•
Install waste system.
•
Check for leakage.
Removable Mounting System
• Parts and Accessories
• 1 1/4" (3.175cm) Internal Diameter
• Includes Umbrella Drain & Mounting Stand
• For Use On Counters Up To 2" (5.08cm) Thick
• Without Overflow
• Measurement: 3" x 8 5/8" (7.62cm x 21.9075cm)
(including tailpiece)
• Patent 6,763,533
• CSA Certified: CSA B125-01, ASME A112.18.2-2002
Customer Service
www.decolav.com
Model Number: 9031 Series
O.D 1 5/8" (4.1275cm) x 11TH
Drain
Countertop
561-274-2110
3" [7.62cm]
2 1/4"
[5.715cm]
Thread
Tailpiece
1 1/4" [3.175cm]
SIDE VIEW
Thick Washer
Mounting Stand
Drain Nut
Tailpiece
Lavatory