Publicidad
Idiomas disponibles
Idiomas disponibles
Using your mobile hotspot
Display layout and icons
1. Signal status icon
2. Network mode icon
3. Send/receive data activity arrows
4. The number of unread messages
maximum is 100
5. Battery capacity icon—if battery
capacity is lower than 25%, this
icon is red
6. Data statistics—used/total
SIM card and battery
Your Airspeed mobile hotspot comes preinstalled with a 4G LTE
SIM card.
NOTE:
when in use. Once the SIM card has been inserted into the
mobile hotspot, do not remove.
• Do not remove SIM card when the device is powered on
because this may damage the card and the device.
• Do not bend or scratch your SIM card. Avoid exposing your
SIM card to static electricity, water or dirt.
Navigating through the Airspeed mobile hotspot
Use the Menu and Power buttons to select actions displayed
at the bottom of the screen. There are 8 main menu screens in
addition to the home screen.
1
2
3
4
5
6
Inserting and charging the battery
1. Use the thumb catch at the bottom of your Airspeed mobile
hotspot to open the battery cover and align the battery
contacts with the terminals in the battery compartment as
shown. Push the battery down until it clicks into place.
(Figure 1 and 2)
Figure 1
2. Place the battery cover over the battery compartment and
press it downward until it clicks into place. (Figure 3)
3. Your Airspeed mobile hotspot comes with a charger. To charge,
plug it into an electrical outlet. Connect the USB cable to
the charger and the other end into the Airspeed mobile hotspot.
Type-C port. (Figure 4)
Figure 2
Figure 3
Figure 4
Publicidad
