TMEZON MZ-VDP-NE202 Manual Del Usuario página 5

Note on wiring connection
Please pay attention to the name marked on the sticker of the machine to avoid
wrong connection. Wiring requirements (The actual effect and the quality of wire rod
has the very big relations):
1. 4 core ordinary unshielded and shielded wiring cable;
2. The effective distance from the outdoor camera to the furthest indoor monitor:
2
Transmission <30m (4x0.4mm )
2
Transmission <60m (4x0.65mm )
3. If you want to extend the distance to more than 60m, it is best to choose thick copper
core cable, shielded wire or 3-core ordinary unshielded wire + 75-3 video cable.
Connect the shield terminal to GND.
Three-wire unshielded cable + SYV75-3 video cable
Integrated video surveillance cable with power cord(2x0.5mm +75-3)
4:If user wants to use CAT5 or CAT6 network cable.effective distance from the outdoor
camera to the furthest indoor monitor will be limited.
For unshielded network cable, the distance will be up to 20m.
For shielded network cable, the distance will be up to 40m.
So CAT5 or CAT6 network cable is not recommended.
CAT5 or CAT6 network cable consists of 4 pairs of twisted pairs(8 wires), here one pair of
twisted pair will be used as one cable.
Green &White+Green, Brown&White+Brown, Orange&White+Orange, Blue&White+Blue.
shield
If it is a shielded wire, it must be connected to GND.
GB - 7
Specification for indoor monitor
Work current
Power supply
Work temperature
Installation way
SD Max capacity
Video format
Resolution
Install the indoor monitor
2
shield
7" / 10.1"
Display screen
Definition
1024x600x3RGB
PAL/NTSC
Standard
Calling mode
Two-way conversation
Calling time >120S
Standby current Max 300mA
Max 800mA
External switching power Supply(DC12V-15V)--Optional
0~+50 C
Surface mounting
128GB(FAT) >Class10
AHD/CVI/TVI/CVBS
1080P/960P/720P/480P
GB - 8 GB - 4