Gerlach Germany GL 6611 Manual De Uso página 8

15.Put the device on surfaces which are resistant to high temperature.
16.Do not place any objects on the closed grill.
17.For adequate air circulation is necessary minimum distance of 30cm from all sides of
device.
18.Do not place the device on a fast intermittently hot surfaces.
19.Do not place the device on the gas or electric stove, near the wall, as well as in close
proximity to heat sources.
20.Do not use this device with charcoal or similar combustible materials.
21.Before cleaning, movement, dismantling, assembling and storing the grill: Turn off the
device, disconnect it from the mains and wait until the grill will cool down.
Accessible surface temperatures can be high when the appliance is operating.
22.
23.Never touch the hot surfaces of the appliance
24.Never carry the device when it is turned on or when it is hot.
25.Do not place the device under kitchen shelves, due to the rising heat and steam.
26.The power cord can not be laid over the device, and should not touch or be near hot
surfaces. Do not place the device under an electrical socket.
27.Clean the unit after each use.
28.Do not use the appliance with wet hands.
29.Do not touch the surface of the device with any sharp objects (eg. a knife)
30.Do not cover the heating plate with aluminium foil , etc., as this can cause
cummulation of heat and damage the plastic parts and coating.
31.Do not put utensils on the heating plates during use. Grill should be opened with a
handle or grip according to the model.
32.Do not use plastic utensils when handling the grill, it can melt.
33.The equipment is not designed to operate using external timers or a separate remote
system.
DESCRIPTION OF THE DEVICE
1.Grill Lid handle
4.Temperature indicator lamp
9.Grill plate holder handle
14. Hinges
Installation instructions:
1. Put the four supporting legs (11) into the (10) four holes in to the base of the grill - according with fig. 1 (the supporting
legs are equipped with latches
2. Put the food trey on the holders - according with fig. 2
3. Put the grill plate holder (8) with the oil tray (7) in to the base of the grill (10) -according with fig. 3
4. Place the heating plate (6) in the grill plater holder(8) according with fig. 4
5. Screw the handle (1) to the grill lid (2) - according with fig. 5
6. Place the grill lid (2) on the grill plate holder (8) by inserting the hinges (14) into the holes hinges (15).
The heating plate(6) must only be used Together with
the grill plate holder(8) ! Fig. 7
Recommendation: No grill lid for indoor use.
2.Grill Lid
5. Thermostat socket
10. ase of the grill plate B
15. Hinge holes
3.Detachable temperature Regulator with power cord
6. Heating plate 7. Fat tray
11.Support legs 12.Food tray holder
8
8.Grill plate holder
13.Food tray