RiverRidge 06-039 Manual Del Usuario página 5

STEP 1
1. Attach 1 magnet plate (F) to left door (1) by inserting 1 wood screw (D) through hole on magnet plate (F) and
tighten to left door (1).
2. Attach 1 handle (K) to left door (1) by inserting 2 machine screws (J) through holes on left door (1) and tighten
to handle (K).
3. Repeat above steps to assemble another magnet plate (F) & handle (K) to right door (2).
STEP 2
1. Insert 2 wood dowels (A) into dowel holes on right support board (13) .
2. Screw 3 cam bolts (B) into pre-threaded holes on right support board (13).
3. Attach 2 metal hinges (E) to right support board (13) by inserting 6 wood screws (D) through holes on metal
hinges (E) and tighten to right support board (13).
4. Repeat above steps for left support board (14).