6-DRAWER DRESSER
DA1011-1
STEP 7
Insert wood dowels (2) and large cam locks (4) into the left side panel (B), middle panel
(D) and right side panel (C) as shown.
Place the top panel (A) on the assembled unit.
Rotate large cam locks (4) on the left side panel (B), middle panel (D) and right side panel
(C) 1/2-turn clockwise to secure the top panel (A).
Further secure top panel (A) with screws (6) through rails (F & H) and middle
panel (D). Use a Phillips head screwdriver (not included) to tighten the screws.