Configuration Of The External Wi-Fi Module; Codes To Use For Registration; Wi-Fi Module Reset; Disposal - Extraflame ETIQUETA NEGRA Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

CONFIGURATION OF THE EXTERNAL WI-FI MODULE

Connect the module as indicated in the "Connection diagram" chapter, checking the electrical power supply and the serial
connection with the stove.
Make sure that the blue "Access Point" light is on.
If the light is off, reset the module by pressing the "
When the blue "Access point" LED is on, the module is ready to receive the configuration from the App and creates a temporary Wi-Fi
network that the App will use during set-up.

CODES TO USE FOR REGISTRATION

The Wi-Fi module is registered via App using two codes:
Š Product code: The article code of the stove to which the module is connected. The product code is usually indicated on a label
attached to the stove or on the first pages of the user manual.
Š Serial Number: It is necessary to use the serial number of the Wi-Fi module, which can be found on a label attached to the
module box or on the back of the module itself.

WI-FI MODULE RESET

To reset the module to its factory settings, press and hold the "RESET" key for 5 seconds.
The network can be identified by the word MyStove followed by the MACADDRESS, shown on the QrCode2 label.

DISPOSAL

INFORMATION FOR MANAGEMENT OF ELECTRIC AND ELECTRONIC APPLIANCE WASTE CONTAINING
BATTERIES OR ACCUMULATORS
This symbol, which is used on the product, batteries, accumulators or on the packaging or documents, means that at the end of its
useful life, this product, the batteries and the accumulators included must not be collected, recycled or disposed of together with
domestic waste.
Improper management of electric or electronic waste or batteries or accumulators can lead to the leakage of hazardous substances
contained in the product. For the purpose of preventing damage to health or the environment, users are kindly asked to separate this
equipment and/or batteries or accumulators included from other types of waste and to arrange for disposal by the municipal waste
service It is possible to ask your local dealer to collect the waste electric or electronic appliance under the conditions and following the
methods provided by national laws transposing the Directive 2012/19/EU.
Separate waste collection and recycling of unused electric and electronic equipment, batteries and accumulators helps to save natural
resources and to guarantee that this waste is processed in a manner that is safe for health and the environment.
For more information about how to collect electric and electronic equipment and appliances, batteries and accumulators, please
contact your local Council or Public Authority competent to issue the relevant permits.
10
" key for 5 seconds.
RESET
ENGLISH
7
6
5
4
3

Publicidad

Tabla de contenido
loading

Tabla de contenido