Sears Kenmore 116.24212 Manual Del Propietário página 14

WARNING
Fire and/or Electrical Shock Hazard
Do not operate with a clogged
exhaust filter or without the exhaust
filter or exhaust filter cover installed.
EXHAUST FILTER
ELECTROSTATIC
The electrostatic filter must be replaced
when dirty. Replace the filter when the
entire surface area is covered evenly. The
filter CANNOT be washed as it will lose
its dust trapping ability.
1. Pull out and up
on the exhaust filter
cover to remove
from the motor
cover and lay aside.
Exhaust_
Filter
3. Place the new
filter into the motor
cover with the
white side down.
Tab
_,, Slot
2. When the
exhaust filter
becomes dirty,
remove it by
pulling straight up.
Exhaust
4. Reinstall the
exhaust filter
cover by insert-
ing the tab into
the slot in the
motor cover.
Press firmly to
snap exhaust ill-
')
ter cover into
place.
Always follow all safety precautions when
cleaning and servicing the Power-Mate ® .
Electrical Shock Or Personal Injury
Hazard
Disconnect electrical supply before
servicing or cleaning the unit.
Failure to do so could result in elec-
trical shock or personal injury from
cleaner suddenly starting.
14