Specifications - Celestron 94036 Manual De Instrucciones

- LED Brightness
Set the brightness of the LEDs on the controller using the
l
slider. One is the dimmest setting, and ten is the brightest.
- Power Down on Disconnect
You can choose to power off all connected devices when
l
you disconnect the controller from CPWI. To do this, click
the Enable button. When you reconnect CPWI, all ports will
turn back on. If you do not enable this feature, power will
flow through the controller as usual when you disconnect
from CPWI.
- Save Data
This feature allows you to export the raw data from
l
the controller in a .CSV format, which you can open
in Microsoft Excel or Google Sheets. If you select this
option, you can find the saved .CSV file in this folder
on your PC: Documents\Celestron\CPWI
To disconnect from the Smart DewHeater and Power Controller 4x
at the end of an observing session, you can either close CPWI and
the Application Shutdown window will appear (Figure 20), or you
can select the "Connection" icon in the upper-left corner and select
"Disconnect." If you have selected "Power Down on Disconnect"
from the Dew Heater>Settings menu, all devices connected to the
controller will turn off. Otherwise, power will continue to flow through
the controller's ports as usual.
Fig 20
Application Shutdown window

9. Specifications

Weight: 1.4 lbs
Dimensions: 7" L x 4.5" W x 3.25" H
Enclosure: Aluminum, fan cooled, integrated dovetail clamps and
tripod strap
Power Input (XT60): 12V DC nominal, 13.8V DC max input voltage,
20A max input current
Power Input (barrel connector): 12V DC nominal, 13.8V DC max input
voltage, 10A max input current, 5.5mm/2.1mm tip positive threaded
barrel connector
Power Outputs: 3x 12V DC, 5.5mm/2.1mm tip positive barrel
connector, 7A max output current for each port
Variable Power Output: 12V DC default, can be set to 3.0-11.0V
DC or 12V DC, 5.5mm/2.1mm tip positive barrel connector, 5A max
output current, indicator LED
Dew Heater Outputs: 4x RCA jacks, 12V DC, 7A max output current
for each port
Thermistor Jacks: 4x 2.5mm Audio jack, compatible with Celestron
Dew Heater Rings and optional Celestron Thermistor for Smart
DewHeater Controllers
PC Port: USB Type B, USB 3.2
USB Hub: 3x USB 3.2 Type A, powered (up to 2.5A)
AUX Ports: 3x AUX ports, compatible with Celestron mounts and
other Celestron products
Environmental Sensor: Integrated, gives ambient temperature and
humidity data, can be recalibrated for best performance
Circuit protection: internally resettable fuses for each port, reverse
polarity protection, under voltage, over voltage, under current, over
current
Firmware: Upgradeable thorough Celestron Firmware Manager
(CFM) software
XT60 Power cable: XT60 plug on one end, cigarette-lighter plug on
other end, 20A fuse, 14 gauge wire
ENGLISH | 11