All manuals and user guides at all-guides.com
GB
ASSEMBLY
• Carefully remove your BOSTON and its accessories from the box.
• Remove the solar module from the lamp unit.
• Pull the orange-marked foil strip out of your BOSTON.
Your BOSTON is now ready for operation.
• Plug the upright poles together in accordance with the desired height.
WARNING! Contact with hidden lines can lead to severe injury or even
death! Please ensure while digging and boring holes that you do not hit
any hidden lines.
• Drive the ground spike into the ground.
• Put the pole into the ground spike.
• Attach the lamp unit to the upright pole.
ATTENTION! Do not press on the surface of BOSTON because this can
damage the solar module.
ERECTION
Select a location for erection with as much exposure to solar radiation as
possible and put BOSTON into the ground. Do not erect BOSTON in the
shade of trees, bushes or buildings, otherwise the charging effect of your
BOSTON will be diminished.
POWER
The power of your BOSTON depends on the time of year. BOSTON is ready
for operation longer in summer than in winter.
How long BOSTON shines at night depends on how long BOSTON was
exposed to direct solar radiation during the day. For example, when the sky is
overcast, less solar energy is available to charge the rechargeable battery.
During the following night, the duration of emission of light of BOSTON is the-
refore shorter.
The duration of emission of light is strongly limited on winter days due to lower
exposure to solar radiation.
NOTE: Clean the solar module regularly with a damp towel to guarantee
optimum performance of the solar collectors. Do not use any solvents for
cleaning. Do not exert any pressure on the solar module during cleaning
6