Deleting Pictures; Using The Timer; Installing The Software - Logitech Pocket Digital Manual De Configuración

Deleting Pictures

1. Press and hold the Resolution/Delete Picture button for one second to put the camera into picture
deletion mode.
2. Delete Picture icon flashes. Camera is in delete-last-picture mode by default. Pressing the Resolution/Delete
Picture button again puts the camera in delete-all-pictures mode.
3. Press the Picture Taking button to delete either the last picture taken or all pictures, depending
upon which delete mode you have chosen.

Using the Timer

1. Press and hold the Timer/Sound button for one second to turn on the camera timer.
2. The Timer icon will flash.
3. Press the Picture Taking button to start the timer.
4. The camera will "beep" slowly ten times, then quickly, before it takes the picture. After the picture
has been taken, the camera returns to normal operation. To cancel the timer, press and hold the Timer/Sound
button for one second.

Installing the Software

1. Turn on the computer.
2. Insert the software CD into the CD-ROM drive.
3. Follow the on-screen instructions to finish installing the software.
3
English