Publicidad
Idiomas disponibles
Idiomas disponibles
8
(3) L-Brackets (LB)
• Attach (3) L-Brackets (LB) to rail (I1), using (3) screws
(S2).
• Attach bottom front molding (HH) to rail (I1), using (3)
screws (S2). Note: (3) small holes in other rail (I1)
will not be used.
9
(12) Cam Studs (CS)
Figure 1
CH
• SEE FIGURE 1...Insert (4) cam housings (CH)
into the holes in left side (D) and right side
(C). Press with thumb to fully seat cam
housings.
• Screw (12) cam studs (CS) into the holes, as
shown, in left side (D) and right side (C).
(6) 1/2" Phillips-head
Screws (S2)
(4) Cam Housing (CH)
Make sure
arrow in cam
housing is facing
the hole in the
edge of panel.
Hole in edge
of panel
S2
LB
D
C
CS
12
HH
I1
CH
CH
CH
CH
Publicidad
