Descargar Imprimir esta página

ELCART 12/23080 Guia De Inicio Rapido página 2

Publicidad

Idiomas disponibles

Idiomas disponibles

ART. 12/23080
INSTRUCTION MANUAL FOR WALL BRACKET PANEL TV LCD/PLASMA
1. Technical parameter:
Maximum load:
Size of flat panel TV:
Distance from wall:
Weight:
2. Part list:
Please check the parts in the package in comparison with the following list.
Make sure all of the parts are in the package.
Never use defective parts.
Never replace part with different specification.
Note: Incorrect installation may cause injury!
No
Name of part
A Self-tap screw
Standard part
B
Plastic anchor
Standard part
C
Ø5 * Ø16 * 1.5 washer
Standard part
D
M4*15 screw
Standard part
E
M5*15 screw
Standard part
F
M6*15 screw
Standard part
G
M8*15 screw
Standard part
3. Installation and operation instructions
Note: please read the instructions carefully before installation!
Use the wall plate as a templet to drill two holes
of Ø 8mm and 50mm depth in the concrete wall.
Then wedge two plastic concrete anchors into the
holes.
ELCART DISTRIBUTION SPA via Michelangelo Buonarroti, 46 - 20093 Cologno Monzese (Milano) ITALY
ELCART DISTRIBUTION SPA via Michelangelo Buonarroti, 46 - 20093 Cologno Monzese (Milano) ITALY
Tel. ++39(0)2/25.11.73.10 Fax ++39(0)2/25.11.76.10 sito internet: www.elcart.com
Tel. +39 02.25117310 Fax +39 02.25117610 sito internet: www.elcart.com
La divulgazione dei dati contenuti in questa scheda è da ritenersi un servizio puramente informativo e non costituisce alcun vincolo da parte della Elcart in merito a prestazioni ed utilizzo del prodotto.
La divulgazione dei dati contenuti in questa scheda è da ritenersi un servizio puramente informativo e non costituisce alcun vincolo da parte della Elcart in merito a prestazioni ed utilizzo del prodotto.
The divulgation of data contained on this technical sheet are exclusively for informational reasons and establish no link on behalf of Elcart regard to thr performances and the usa of the product.
La divulgacion de los datos contenidos en esta ficha son un servicio unicamente informativo y no constituyen ningun vinculo de parte de Elcart respecto a las prestaciones y uso del producto.
ART. 12/23080
30 kg.
15"÷37"
10mm
0.31 kg.
Material
Amount
2
2
4
4
4
4
4
Screw two self-tapping bolts into the foresaid two
plastic anchors through the mounting holes in the
wall plate to fix the wall plate on the wall tightly and
flatly.
ELCART
Manuale di istruzioni/Scheda tecnica
Refer to your TV manual to determine the diameter of the screw, spacer and washer necessary or
choose an appropriate these accessories to the size, height and position of the holes on our TV.
Select four suitable bolts from the parts bag and attached the TV connection circle to the back of the
TV tightly. Note: The washer (C) is only used for bolts (D or E).
Put the steel cable on to the two TV connection circle as shown in the fig., then hang the TV together
with the TV connection circle and steel cable onto the wall plate. Don't relax hands until hung firmly.
The display can be support from wall using the two bottom connection circle on the back of the TV
e-mail: info@elcart.it
e-mail: info@elcart.it
PAGINA 2 DI 3
MADE IN CHINA

Publicidad

loading