Hartan Skater GT Manual Del Usuario página 24

Fixing the carrycot to the frame
1. Take the stroller unit off the chassis.
2. Place the carrycot on the chassis in a way that the two lateral fixing
pins engage in the slots of the fixing frame.
3. When you apply slight pressure, the two locks engage with a clearly­
audible „click".
WARNING:
4.
the carrycot.
5. Pull the two locking levers downwards until they snap into place to
open the lock and to remove the carry cot unit.
WARNING:
in depth.
6. To carry and put down the carrycot safely, the metal support bars
must be folded against the base 27.
20
Check that both locks are securely engaged by lifting
Do not use mattresses that have more than 2cm
27
27