7- Basic Operating Instructions; Turn On The Led Tv; Switch Among Different Inputs; Mute - DGM ETV-1969W Manual Del Usuario

7- BASIC OPERATING INSTRUCTIONS

1. TURN ON THE LED TV

1) When the STANDBY button is pressed and the LED TV IS turned on,
the indicator light on the front of the LED TV changes from red to green.
2) When the LED TV is turned on, the input mode is displayed on the screen.
3) When the LED TV is turned off using the STANDBY button,
the LED TV will to into standby mode and the indicator light turns red.

2. SWITCH AMONG DIFFERENT INPUTS

DTV/TV/AV/ S-VIDEO/SCART/YPbPr/HDMI/PC/MEDIA
Press the Input button to display the inputs mode menu,
Then press ▼/▲ key to select a input source and press Enter key to confirm.

3. MUTE

1) press the MUTE button to mute the sound temporarily.
A Mute icon appears on the screen.
2) Press the MUTE button again to restore the sound .
The Mute icon disappears.
NOTE: When you turn the LED TV off, the mute function is canceled automatically.

4. SELECT THE TV CHANNEL

You can use the number keys on the remote control to directly select TV channels.
The LED TV can store up to 99 channels (1 to 99), and you can press the keys on the remote control
or on the panel to make a selection.
1) Press the relevant key on the remote control if you want to choose any
channel from 1 to 9 .(For example: if you want to choose channel 8,just
press the key number 8).
2) Press the CH+ button to browse up and the CH- button to browse down
the available channels.

5. ASPECT

Press to display proportion. (Full;4:3; Auto).

6. SUBTITLE

Press SUBTITLE button on your remote control to enter the Subtitle Menu.
If this channel has no subtitle, you'll see " No information " .Else you'll see this picture
All manuals and user guides at all-guides.com
EN 6