Assembly; Base; Castors And Wheels; Suction Unit - Metabo SPA 1702 Manual De Usuario

6 Assembly

6.1 Base

16
Set up the column (16) with the recess down.
Position the base-plate (14) and secure with
5 M6x16 hexagonal socket-head screws,
6.4 washers and M6 hexagonal nuts as
illustrated. To tighten threaded connections,
use a 10 mm AF box spanner and a 4 mm AF
Allen key for hexagonal socket-head screws.

6.2 Castors and wheels

13
13
Locate 8.4 washer on the grub screw on the
castor (13). Push castor (13) with its washer
fitted into the holes drilled for the purpose in
the base-plate (14).
Fit 8.4 washer and M8 hexagonal nut. Tighten
hexagonal nut with a 13 mm AF open-ended
spanner while holding the castor in position
with a second 13 mm AF spanner.
All manuals and user guides at all-guides.com
14
14 13
15
15
Fit wheel (15) with two 8.4 washers to the
M8x60 hexagonal-head screw and tighten the
M8 hexagonal nut so that the wheel (15) turns
easily in its location between the washers on
the hexagonal-head screw. Fit the 8.4 washer
onto the hexagonal-head screws with the
wheel (15) fitted in place. Insert the hexagonal-
head screw through the lateral holes drilled in
the base-plate (14) and secure with the
8.4 washer and M8 hexagonal nut. Press the
cover into place on the wheel until it can be
heard clicking into place (see illustration).

6.3 Suction unit

6
16
Locate the column (16) with base-plate on the
wheels. Place the suction unit (6) on the
column (16) and align. Insert 4 M6x16
hexagonal socket-head screws through the
holes drilled for the purpose at the top and
tighten with a 4 mm AF Allen key.
ENGLISH
14
15
13