Maintenance, Cleaning And Storage; Inspection And Maintenance Log; Date Of Manufacture - Werner A710004 Para El Usuario

MAINTENANCE, CLEANING AND STORAGE

Cleaning periodically will prolong the life and proper functioning of the product. The frequency
of cleaning should be determined by inspection and by severity of the environment. Clean with
compressed air and/or a stiff brush using plain water or a mild soap and water solution. Do not use
any corrosive chemicals that could damage the product. Wipe all surfaces with a clean, dry cloth
and hang to dry, or use compressed air. When not in use, store anchorage connectors in a cool, dry,
clean environment, out of direct sunlight and free of corrosive or other degrading elements.

INSPECTION AND MAINTENANCE LOG

MODEL NUMBER:

DATE OF MANUFACTURE:

Date Part Number
Inspection:
Official periodic inspection must be made at least annually. The inspection must be
performed by a qualified person other than the intended user. If severe weather or conditions
exist then inspections must be carried out more frequently. All inspection results must be
logged in the space provided above. (It is recommended that the anchor device is marked
with the date of the next or last inspection.)
*If any damage that could affect the strength or operation of the device, or unsafe
conditions are found, proper disposal is required. The anchorage connector must be
rendered unusable and then properly discarded.
Page 4
93 Werner Road
Greenville, PA 16125
1(724)-588-2000
1(888)-523-3371 toll free / Ilamada gratuita
1(888)-456-8458 fax
Comments
Werner Co.
Inspector Name
P/N 108862-01 REV A 3/16