Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
English
CAUTION:
NEVER REMOVE THE
COLLECTION BAG WITHOUT FIRST TURNING OFF AND
UNPLUGGING THE VACUUM.
As the bag fills the power of the suction will decrease. To
empty collection bag, switch off the vacuum and disconnect
tool from the power supply. Remove the collection bag
from the power head, unzip the collection bag to empty.
Re-assemble before continuing to operate.
Figure J
What to do if the unit jams: (Figure K)
CAUTION:
TURN OFF UNIT AND
DISCONNECT TOOL FROM POWER SUPPLY.
If the unit motor stops, the fan has become jammed. If this
happens, turn the unit off and disconnect from power supply.
Remove the bag and vacuum tube. Remove the jamming
material using a small wooden stick. Do not use a metal
implement or anything, which may damage the fan or
scratch the plastic. Ensure the fan will turn by hand before
reassembling the unit.
If the unit stops picking up debris or the performance
substantially reduces it may have become clogged. Switch
the unit off and disconnect from power supply. Remove the
vacuum tube and look down the tube to ensure no debris is
blocking it. If necessary remove debris with a small wooden
stick. Do not use a metal implement or anything, which may
scratch or damage the tube. Remove the bag. If the bag is full,
empty the bag. If necessary remove any debris from around
the fan or unit outlet using a small wooden stick. Do not use
a metal implement or anything which may damage the fan
or scratch the plastic. Ensure the fan will turn by hand before
reassembling the unit.
Figure K
6
All manuals and user guides at all-guides.com
MAINTENANCE
Cleaning and Storage
Use only mild soap and a damp cloth to clean the tool. Never
let any liquid get inside the tool; never immerse any part of
the tool into a liquid. Clean out any clippings which may have
accumulated in the Blower/Vac. When used properly with dry
leaves the fan chamber of your Blower/Vac should remain
clean. If damp earth and debris are ingested some of the
particles may build up on the inside of the fan chamber. If this
happens the performance of the unit will decrease. This area
can be cleaned out using a wooden stick as shown in figure K
after disconnecting from the power source. Your Blower/Vac
should be stored in a dry place.
Do not store the tool on or adjacent to fertilizers or chemicals.
Such storage can cause rapid corrosion of the metal parts.
ACCESSORIES
SERVICE INFORMATION
All BLACK+DECKER Service Centers are staffed with trained
personnel to provide customers with efficient and reliable power
tool service. Whether you need technical advice, repair, or
genuine factory replacement parts, contact the BLACK+DECKER
location nearest you. To find your local service location, call:
1-800-544-6986 or visit www.blackanddecker.com.
WARNING:
SHOCK HAZARD. DO NOT
POUR OR SPRAY WATER ON THE TOOL IN AN ATTEMPT
TO CLEAN.
CAUTION:
TURN OFF UNIT AND
DISCONNECT TOOL FROM POWER SUPPLY.
WARNING:
DO NOT use this product
with any type of accessory or attachment. Such usage
might be hazardous.
Publicidad
Tabla de contenido
