Technical Specification - Tizi Tankstelle Manual Del Usuario

Tankstelle
Error handling:
Blinking: The port is overloaded and will be
turned off. Unplug the USB cable and check it
for defects.
Tip
If an iPad connected via a 30-pin cable shows "Not
charging", please disconnect it from tizi Tankstelle
and then reconnect it. It will then start to charge.

Technical Specification

★ Input: 100-240V~ 50-60Hz 600mA
★ Output: 5V ⎓ 5A
★ tizi Auto Max Power Technology on each port
(up to 2.4A)
★ Overload protection for each port
★ Over temperature protection
★ Standby Power < 0.2W
★ Operating temperature: -10°C to 35°C
EN 12
EN
EN