Step2
Step2:
Fig.5: Insert top long pole (F) into connector of top long pole (E).
Fig.6: Insert top long pole (F) & top short pole (G) into top connector (H).
Fig.7: Insert connector of top long pole (E) into left screen (A) & right screen (B).
Fig.8: Lock up top short pole (G) & pole
(D/C)
with washer (BB) & bolt CC.
Put the big canopy (K) on the
top frame, do not fully spread.
Fig.9: Insert small top pole (J) into small top connector (I).
Fig.10: Lock up small top pole (J) & big top pole (F) with washer (BB) & bolt (AA) &nut (EE).
.