Tabla de contenido
Publicidad
Slide Power Switch from OFF to Test (the
indicator light will flash twice once the micro
SD card was detected, and flash 1 time if no
micro SD card in it) then turn to ON position,
the camera powers on.
(Please don't slide the
power switch from OFF to ON
directly)
After you inserted the Micro SD card (included)
to camera, connect with the computer by USB
cable (under TEST mode), and then the
camera will be a removable disk.
3.4. ON
In this mode, the camera works automatically
by motion detection. The indicator lamp will
flash approx 10s for buffering.
ENG 10
Publicidad
Tabla de contenido
