Change Lock Code - PNI SMART LOCK Manual De Usuario

The padlock comes with factory default unlock code 0-0-0. Align the number
0 of the 3 wheels with the red line on the padlock to unlock. To lock, bring the
padlock to the closed position and turn the 3 wheels randomly.

Change lock code

1. Unlocking the padlock: Adjust the 3 numeric wheels so that the digit zero
(0) is collinear 0-0-0 with the red line on the padlock.
2. Pull the padlock ear vertically to open it and turn the ear 180 degrees
counterclockwise.
3. Press shortly the ear of the padlock into lock body .
4. With the padlock ear pressed, change the 3 wheels to obtain another
password, desired by you. Write down the password in a diary or special place
for passwords to remember it in case you forget it.
5. Release the lock ear and turn it 180 degrees again to the original closed
position. Rotate the 3 rollers to lock the padlock. The procedure is successful
and in this way you have changed the password. Check the opening of the
lock with the new password.
If you want to change the password again, repeat the steps above.
User manual 3