Package Contents; Installation Environment; Quick Install; First-Time Use - TruVision TVR 1604c Guia De Inicio Rapido

Package contents

The TruVision DVR 16 (model TVR 16) is
shipped with the following items:
• AC power cords
• 12 VDC PSU
• USB mouse
• DVR
•
TruVision DVR 16 Quick Start Guide
You can download the software and the
following manuals from our web site:
•
TruVision DVR 16 User Manual
•
TruVision Recorder Operator Guide

Installation environment

Refer to the user manual for detailed
information, but observe these important
requirements:
• Place the unit in a secure location.
• Ensure that the unit is in a well-ventilated
area.
• Do not expose the unit to rain or moisture.

Quick install

Recommended steps for setting up the
recorder:
1. Connect all the devices required to the
back panel of the recorder. See Figure 1
on page 7.
Basic connections:
Connect the cameras to the BNC camera
inputs and monitor A to the BNC, VGA or
HDMI output. Connect the mouse to the
USB port in the front panel.
Optional connections:
All the other connections shown are
optional and depend upon installation
requirements.
2. Connect the power supply to the unit and
turn on the power.
3. Set up the unit with the required settings
using the setup Wizard.
EN 4

First-time use

The recorder has an express installation
wizard that lets you easily configure basic
recorder settings when first used. It configures
all cameras simultaneously. The configuration
can then be customized as required.
By default, the setup wizard will start once the
recorder has loaded. The wizard walks you
through some of the more important settings
of your recorder. Select the preferred
language for the system and then enter the
administrator password. There is no default
password provided.
The wizard will then guide you through the
menus to set the time and date, network
configuration, HDD management, and
recording configuration.
When all the required changes have been
Finish
entered, click
recorder is now ready to use. Recording starts
automatically.

Operating the recorder

There are several ways to control the unit:
• Front panel control
• Mouse control
• Web browser control
• TVK-600 keypad
• TVK-800 keypad
• Software (TruVision Navigator,
TVRMobile)
Front panel
The buttons on the front panel control fewer
functions than using a mouse. See Figure 2
on page 2 for the locations of the controls.
USB mouse
The USB mouse provided with the recorder
operates all the functions of the recorder,
unlike the front panel, which has limited
functionality. The mouse lets you navigate and
make changes to settings in the user
interface. Use a USB 2.0 mouse in the front
panel.
Connect the mouse to the recorder by
plugging the mouse USB connector into the
USB port on the back or front panel. The
TruVision DVR 16 Quick Start Guide
to exit the wizard. The