OPERATION
BEFORE STARTING THE ENGINE
-
Be familiar with controls, how each functions and
what each operates.
-
Check the engine oil level. Add if necessary.
-
Open the fuel valve.
STARTING THE ENGINE
1. Move the lift lever to the raised position.
2. Disengage the clutch control. (The engine will
not start if the clutch control is engaged).
3. Move the throttle lever midway between fast and
slow.
4. Use the choke as required to start a cold engine.
Choke control F is located on the front of the
engine.
10
OVERSEEDER
5. Stand at side of unit placing left foot on top of
housing and slowly pull the recoil starter until
just past compression. Return starter handle,
pull firmly with a smooth, steady motion to start.
MATAWAY