Panasonic TC-26LX70 Guia De Inicio Rapido página 47

If there is a problem with your TV, please refer to the table below to determine the symptoms, then carry out the
suggested check. If this does not solve the problem, please contact your local Panasonic dealer, quoting the model
number and serial number (both found on the rear of the TV).
Problem
Chaotic image, noisy
No image can be
displayed
Only spots are displayed
instead of images
Neither image nor
sound is produced
No sound is produced
Sound is unusual
The main unit is hot.
Actions
•
Check nearby electrical products
(car, motorcycle, fluorescent lamp).
•
Check Picture menu (p. 22)
•
Check the channel settings. (p. 30)
•
Check the antenna cables.
•
Is the power cord plugged into the outlet?
•
Is the TV unit turned On?
•
Check Picture menu (p. 22) and volume.
•
Are the remote control codes correct? (p. 39-41)
•
Are the speakers' cables connected correctly?
•
Is "Sound Mute" active? (p. 15)
•
Is the volume set to the minimum?
•
Is "Speaker output" set to "Off"? (p. 22)
•
Change "SAP" settings. (p. 18)
•
Check "HDMI 1 in" or "HDMI 2 in" settings.
(p. 22)
•
Set "SAP" setting to "Stereo" or "Mono."
•
Check the HDMI device connected to the unit.
•
Set the audio setting of the HDMI device to
"Linear PCM."
•
If digital sound connection has a problem,
select analog sound connection.
•
The main unit radiates heat and some of the parts may
become hot. This is not a problem for performance or
quality.
Set up in a location with good ventilation.
Do not cover the ventilation holes of the TV with
a tablecloth, etc., and do not place on top of other
equipment.
47