HQ-Power CAMCOLVC26 Manual Del Usuario página 8

Deleting a Video/Photo
1. Press [e] to enter the playback mode.
2. Press or
3. Press MENU [a] to enter the menu.
4. Select the DELETE option with
submenu.
5. Select YES or NO with
6. Press [e] again to go back.
Formatting Your SD Card
1. Press [e] to enter the playback mode.
2. Press or
3. Press MENU [a] to enter the menu.
4. Select the FORMAT option with
the submenu.
5. Select YES or NO with
6. Press [e] again to go back.
Auto Power-Off
The camera will automatically switch to stand-by mode if no keypad is
touched for 60 seconds, unless the menu mode is activated.
6.3 Operation Menu
To enter the menu:
1. Switch on the camera with the on-off button [g] and press OK [f].
2. Press MENU [a] to enter the menu.
3. Navigate through the menu or submenu with
OK [f] to enter the submenu or to confirm.
4. Press MENU [a] to go back one level.
Camera ID
Name your camera. This function is useful when using multiple
cameras.
1. Enter the submenu and select ON with
OK [f] to confirm.
2. Press
or
3. Press OK [f] to confirm or MENU [a] to exit.
Camera + Video
Combined photo/video mode. When triggered, the camera will first
take a picture and then automatically start recording. See Video
Length and Multi-Shot for detailed configuration.
1. Enter the submenu and select ON with
2. Press OK [f] to confirm or MENU [a] to exit.
V. 01 – 17/11/2014
CAMCOLVC26
[b, d] to select your photo/video.
or
[b, d] to select your photo/video.
or
or [c, e] to select your digit or character, press
[b, d] to select the next digit or character.
or [c, e]. Press OK [f] to enter the
[c, e]. Press OK [f] to confirm.
or [c, e]. Press OK [f] to enter
[c, e]. Press OK [f] to confirm.
8
or [c, e]. Press
or [c, e]. Press
or [c, e].
©Velleman nv