Table of contents - Part 1
1.1
General information ..................
1.2
Scope of delivery ......................
1.3
Conventional use ......................
1.4
Technical data ..........................
1.5
Components.............................
1.6
Commissioning .........................
1.7
EC Declaration of Conformity ......
The specified illustrations appear at the be-
ginning of the Operating Instructions.
1.1
General information
Observe the safety instructions!
Read the Instruction Manual!
Note: Read and memorise part 2 of the
instruction manual!
1.4
Technical data
Air consumption
Max. permissible pressure
Working pressure (flow pressure)
Volume of blasting abrasive vessel
Air nozzle material
Nozzle diameter (standard)
Grain size
Material suction hose (length)
Sound pressure level L
as per DIN 45 635, part 20
Recommended hose diameter (inner) at L= 10 m
Overall dimensions (without hose) width x depth x height
Weight (including vessel, excluding suction hose and blasting
abrasive)
Weight (including vessel and suction hose, excluding blasting
abrasive)
1.5
Components
01
Plug nipple
02
Trigger lever
03
Reducing nipple
04
Material suction hose
05
Blasting abrasive vessel
06
Counternut
07
Air pipe
(at distance of 1 m)
pa
Subject to technical modifications. Illustra-
tions may deviate from the original.
3
1.2
Scope of delivery
3
– Sand blasting gun
3
– Material suction hose
3
– Systainer
3
– Instruction manual
3
4
1.3
Conventional use
The compressed air sand blasting gun
is an industrial tool designed for:
Removing rust from any metal
and blasting concrete surfaces, brickwork,
sandstone, wood and paint.
Any other type of use is considered contrary
to the intended use.
11
Nozzle
14
Blasting abrasive vessel cover
15
Ventilation
1.6
Commissioning
Note: Read and memorise part 2 of the
instruction manual!
Caution: Depressurise the unit!
SSP - SAW 4 SYS
300-600 l/min
10 bar
2 - 6 bar
1000 ml
Carbide (interior)
6 mm
0,2 - 0,8 mm
1300 mm
70 dB(A)
9 mm
230 x 105 x 250 mm
0,82 kg
1,38 kg
GB
I/ 3