Instructions For Use - Princess 535576 Instrucciones De Uso

PRINCESS WET AND DRY RECHARGEABLE HAIR CLIPPER
BEFORE USING
Before use, first read these instructions carefully and retain for later reference. Check to ensure the
voltage in your home matches that of the appliance. Do not place the charger unit near a shower, wash-
stand or bathtub, etc., filled with water. If the charger unit has fallen in the water, never try to remove it.
First pull the plug from the socket. Always use the charger unit with dry hands.
Warning: Never use the charger base and the adaptor in the bathroom
DETAILS
Practical rechargeable (cordless) clipper with a charge indicator light and handy table base, which also
serves as a charger. Splash-resistant - can be used in the shower, but not under water. Complete with
two adjustable comb attachments with 7 positions (4 to 20 mm) (24 to 40 mm), comb, scissors, charge
adapter, cleaning brush. The comb attachment is used to set different cutting lengths. This makes cutting
and trimming so easy that even as a home hairdresser, you can achieve professional results.
DIRECTIONS FOR USE
Switch on the clippers with the 2-setting slide switch.
Sliding the comb attachment will change the cutting length: sliding it forward will produce a longer
length, and backward will result in a shorter length.
The comb attachment is simply clicked onto the clipper.
To remove the comb attachment after unlocking
the button, pull it up.
You can lock the length of the comb attachment on the bottom of the clippers by shifting the button.
When you want a different length, you can simply unlock the comb attachment by sliding the button and
the comb attachment. The window shows the setting of the comb attachment.
Before you start cutting:
- First check the clippers. Make sure there are no hairs or dirt on the clippers. Switch on the clippers and
check whether they are working properly.
- Drape a towel around the neck of the person whose hair you are about to cut.
- Seat the person is such a way that his/her head is at eye level for you, enabling you to see better and
work more comfortably. If necessary, use books or cushions to raise the person to eye level.
- First comb the hair, removing any knots or tangles. Now hold the clippers as comfortably as possible.
- Relax and work with precision, making short "runs". Do not shave off the side or back of the hair
straightaway; work gradually over the entire head.
- It is better to remove a small patch at a time. You can always remove more later.
- Before you start and while you are working, comb the hair regularly into the desired hairstyle.
To start cutting
When working with the clippers for the first time, cut only a small part of the hair until you become used
to the amount of hair that is cut off with a particular setting.
After the hair has been combed into the natural direction of growth, proceed as follows to
achieve a flowing, tapering hairstyle:
Step 1. The neck section.
Use comb attachment 1 or 2. Hold the clippers with the cutting side up and start cutting in
the middle, at the bottom of the neck. Hold the clippers lightly against the head with the
teeth of the comb attachment facing up. Gradually move the clippers upwards, work up
and to the outside through the hair, removing only a small part at a time. While cutting,
gradually move the head of the clippers towards you. Then cut the back section from the
beginning of the neck to above the ears.
ART. 535576
6