26
Problem
The blender does not start.
The blades do not turn with
the motor on.
Noise and vibration of
container.
Make sure it is plugged in.
•
Make sure the safety circuit breaker is closed.
•
Make sure the switch on the blender (7 Fig. 2) is turned to
•
"ON".
If the problem occurs after a long period of intensive use the
•
motor may have overheated. Wait at least 20 minutes and try
again. If you put the blender in a cool place this will reduce
the waiting time.
If the problem occurs after an overload, the circuit breaker on
•
the motor may have been tripped! Push the button on the
back of the appliance (8 Fig. 2).
Make sure the blades and motor revolve freely.
•
Check that the base/container coupling clutches are in good
•
condition.
Make sure the container is correctly fitted on the base.
•
Make sure the blades and clutches are securely tightened.
•
Check that the base/container coupling clutches are in good
•
condition.
Solution
GB