5.2
Press buttons no. 3 or 6
Ventilation system does not require maintenance and its major features are its longevity and silent
operation.
5.3
Our device has an electrical motor (0,55 kW), which has the highest performance in its class. In
spite of its power, most important feature of the motor is its silent operation and suitable propelling
force. Motor does not require maintenance and based on our experience we can say that you will
have a long lasting and smooth usage.
Polishing motor starts by pressing the button n° 4
To adjust revolution, for MSA23.003, you can adjust speed to 1500 RPM with position (I)
and 3000 RPM with position (II) via button no. 5 shown here.
You make adjustment by turning potentiometer no. 5, clockwise or vice versa. You can
see the number of revolutions (RPM) on page 5 (Only for MSA23.004).
The number of revolutions can be adjusted at all time by turning the potentiometer
while the engine is running.
Polishing machines POLYTEC by PRECITEC® / MSA23.003 - MSA23.004 / User manual
VACUUM SYSTEM
on control panel to run the vacuum system.
Important! Failures and damages are only suitable to be
repaired by manufacturer BALKAN MOTOR A.Ş. otherwise all
warranty and liability insurances shall be removed.
POLISHING MOTOR
We would like to remind you that motor can heat up to 85° C
during long polishing processes. This is normal and does not
affect power and life of the engine.
During "0" position the polishing motor is stopped but
it is still under load, we recommend to stop the motor
via on/off switch, if you want to stop it.
on the control panel.
23