Select Preset Equalizer; Adjust Eq Parameters; Adjust Fad Bal - Better BT4550 Manual De Operaciones

Select Preset Equalizer

1. Enter the EQ setup mode
Touch the [ ] icon in the user interface and the EQ setup
interface will display on the screen.
2. Select EQ mode
Touch the desired EQ selection: [ Optimal ] / [ Classic ] / [ Rock ]
/ [ Jazz ] / [ Techno ] / [ Pop ], and the EQ mode will change.

Adjust EQ Parameters

To adjust EQ parameters, touch and drag the parameters
adjustment bar.
[ User ]: Set the desired audio effect.
[ Flat ]: Select the original audio effect.
[ Reset ]: Cancel the equalizer function settings.
[ Loud: On/Off ]: When listening to music at low volumes, this feature
will selectively boost certain bass and treble frequencies.

Adjust FAD BAL

You can adjust front/back/left/right balance of the speaker and the
subwoofer volume to get balanced listening effect according to the
surroundings and your interest.
1. Enter the EQ setup mode
Touch the [ ] icon in the user interface and the EQ setup
interface will display on the screen.
2. Adjust subwoofer volume
Touch [ ] / [
-12 to +12.
3. Adjust fader / balance value
Touch [ ] / [
from -20 to +20.
[ ]: Front speaker
[ ]: Rear speaker
[ ]: Left speaker
[ ]: Right speaker
Notes:
1. The parameters of the EQ modes has been preset and you can
not change them besides 'User'.
2. The EQ mode will change to 'User' automatically when you adjust
the frequency value under the modes besides 'User'.
3. The value of Sub is independent of EQ mode and can be
adjusted separately.
9480CE4M11A277A manual_EN.indd 8
Basic Operations
] or drag [ ] to adjust subwoofer volume from
] / [ ] / [ ] to adjust fader / balance value
EN - 8
2015-4-14 8:49:28