HAMPTON BAY WHITLOCK Guía De Uso Y Cuidado página 7

Assembly - Hanging the Fan
1
Attaching the fan to the electrical
box
NOTE: For better fan performance, make sure the
mounting plate is level. Additional washers (HH) (not
included) may be needed to insert between the outlet
box and the mounting plate.
□
Turn the power off.
□
Securely attach the mounting plate (A) to the outlet box (FF)
using the two screws (GG) supplied with the outlet box (FF).
Pull the 120-volt supply wires (the black, white and ground
wires) out of the outlet box (FF) and through the hole in the
mounting plate (A) and push them to the side.
2
□
FF
HH
A
GG
□
7
Hanging the fan-motor assembly
Carefully lift the fan-motor assembly (C) and engage
the slot in the motor bracket on the top of the fan-
motor assembly (C) with the hook on the mounting
plate (A) so that it is securely suspended. Then
connect the wiring to your fan according to step 3
"Making the Electrical Connections".
II
Once wiring is completed, lift the motor bracket on the
top of the fan-motor assembly (C) so that the threaded
studs (II) on the mounting plate (A) protrude through
the slot in the motor bracket. Securely tighten the
three locknuts (BB) onto the threaded studs (II), then
try to shake the fan-motor assembly (C) to ensure that
the assembly is tight.
II
BB
Please contact 1-877-527-0313 for further assistance.
C
A
C
HAMPTONBAY.COM