Insignia NS-HWG1955E Guia Del Usuario página 10

NS-HWG1955E-C_18-0256_MAN_V2_TRI-LANG.fm Page 10 Wednesday, April 25, 2018 9:12 AM
Step 5 Attaching the back
:
1 Align the left side back panel (I) with the back of the unit. Push on opposite corners to "square" the unit, if
required.
2 Using a Phillips screwdriver, fasten the back to the main body of the TV stand with the small screws (4).
3 Align the center back panel (J) with the back of the unit. Push on opposite corners to "square" the unit, if
required.
4 Using a Phillips screwdriver, fasten the back to the main body of the TV stand with the small screws (4).
5 Align the right side back panel (I) with the back of the unit. Push on opposite corners to "square" the unit, if
required.
6 Using a Phillips screwdriver, fasten the back to the main body of the TV stand with the small screws (4).
10
NS-HWG1955E/NS-HWG1955E-C/NS-HWG1955B-C
You'll need:
Phillips screwdriver
www.insigniaproducts.com
4 Small screws (28)