What's In The Box - Impecca AS2000 Guía De Usuario

Introduction
Thank you for purchasing the Impecca Octopus Dock Speaker for iPhone® or iPod®. This docking speaker
system is ideal for your Apple iPod®, iPhone® or your MP3/MP4 player, CD player, mobile phone, laptop
computer, desktop computer , or other audio sources equipped with a 3.5mm output jack. Enjoy!
Please Read the Following Safety Precautions Before Using This Product
1. Heed all warnings on the product and in the operating instructions.
2. Do not use accessories that are not recommended by the manufacturer.
3. Do not place the device on an unstable cart, stand, tripod, bracket, or table.
4. Do not use the device near water, sinks, bathtubs, swimming pools, washing machines, etc.
5. If cleaning is required, use a soft dry cloth; if necessary, use a damp cloth without any solvents.
6. Keep the device away from extreme heat, and away from sources that produce extreme heat,
such as space heaters, radiators, stoves, etc.
7. Do not open the device, as electric shock may occur.
FCC & IC
This device complies with EN55022 & EN55013 standards of CE-EMC and Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) this device may not cause harmful interference,
and (2) this device must accept any interference received, including interference that may cause undesired
operation.

What's In The Box

(1) Octopus Dock Speaker, (1) AC/DC Adapter, (1) 3.5 mm stereo cable, (1) User's Guide
Buttons and Layout
Operating Instructions
1) Remove the Octopus Dock Speaker and the universal adapter from the package.
2) Make sure the power dial, located at the front of the device, is set to the "OFF" position.
3) Plug the AC/DC adapter into an outlet and connect the other end into the DC power supply jack,
located at the back of the device.
4) Turn the power dial to the right to turn on the device. An amber colored LED will illuminate, indicating
connection to a su cient power source.
5) Select a song or music directory on your audio source device and press play.
Docking and Playing Music Using an iPod® or iPhone®
1) Remove the docking cover located at the top of the Octopus Dock Speaker.
2) Connect your iPod® or iPhone® to the 30-pin connector in the docking area as shown on the cover of this
manual. Be sure that the device is rmly connected.
3) Using your iPod® or iPhone®, select a song and press play.
4) Adjust the volume by turning the volume dial to the right to increase volume, or to the left to
decrease the volume.
Note:
While docked, the iPod® or iPhone® will automatically recharge if the speaker device is connected using
the universal power adapter.
Playing Music Using Other Audio Devices
1) Plug one end of the 3.5mm stereo cable to the AUX jack located at the back of the device.
2) Plug the other end of the 3.5mm stereo cable to the earphone jack of your MP3/MP4, CD player, PC , or
any other audio device (equipped with a 3.55mm audio output jack).
3) Using your audio device, select a song and press play.
4) Adjust the volume by turning the volume dial to the right to increase volume, or to the left to
decrease the volume.