Kenmore 116.10701 Manual De Uso Y Cuidado página 17

Review this table to find do-it-yourself solutions for minor performance problems. Any other
service needed should be
performed
by a Sears or other
qualified service agent.
bWARNING
Always
turn off and unplug vacuum cleaner before performing maintenance to the
vacuum cleaner. Failure to do so could result in electrical shock or
personal injury.
Vacuum cleaner won't
start.
Poor job of dirt
pick-up.
1. Unplugged at wall outlet.
2. Tripped circuit breaker/blown
fuse at household service panel.
1. Full or clogged dust bin.
2. Clogged airflow passages.
3. Dirty filters.
4. Hole in hose.
5. Dust bin open.
1. Plug in firmly, push ON/OFF switch
to on. (page 8}
2. Reset circuit breaker or replace fuse.
1. Empty dust bin. (page 13}
2. Clear airflow passages. (page 12}
3. Change/Clean filters. (page 15 & 16]
4. Replace hose.
5. Close dust bin until release button is
latched. (page 13}
Vacuum cleaner starts 1. Tripped thermal protector 1. See PERFORMANCE FEATURES-
but shutsoff. in canister. '_Thermal Protector."/page 11]
Cord won't rewind. 1. Dirty power cord. 1. Clean the power cord.
2. Cord jammed. 2. Pull out cord and rewind./page
8]
Vacuum Cleaner Help Line:
1-877-531-7321
8:00am-5:OOpm EST, M-F
(U.S.A. and Canada)
- 17-