The self-cleaning feature cleans inside the plate, removing impurities. We
recommend using it every 10 to 15 days. Directions are as follows:
1. Fill the tank up to the maximum level indicated and set the steam selector to
"O".
2. Set the thermostat dial (H) to the maximum temperature and wait for the
Indicator Light (E) emits green light.
3. Pull the plug out of the socket and hold the iron horizontally over the sink.
4. Hold the Steam Control Knob (B) on the cleaning position for 60~90
seconds, until all the boiling water, steam, and impurities come out [Fig. 7].
5. When the soleplate has cooled down, you can clean it with a damp cloth.
Retractable Cord:
1. Grab the cord and slowly pull out to the length that you need for ironing.
2. When you need to store the iron, grab the plug with one hand and press the
Cord Rewind Button (G) with the other hand. [Fig. 8]
CAUTION :Be careful not to let the cord snap back towards your body.
Cleaning:
Note: before cleaning the iron in any way, make sure that the appliance plug is
not connected to the socket.
Any deposits, starch residue or size left on the plate can be removed using a
damp cloth or an nonabrasive liquid detergent.
Avoid scratching the plate with steel wool or metallic objects.
The plastic parts can be cleaned with a damp cloth then wiped over with a dry
cloth.
Storing your Steam Iron:
WARNING: Always unplug the product and allow it to cool before cleaning or
storing it.
When ironing is complete, turn the Steam Dial to the "O" position. When
there is no steam, turn the Temperature Dial to "MIN" point. Unplug the
product from the electrical outlet.
NOTICE: Always unplug the product from the electrical outlet when it is not in
use or will be left unattended.
Empty the reservoir by turning the Iron Upside down and gently shaking it.
Please be very careful as contents might still be hot.
Leave iron vertically to cool down completely.
Always store iron in vertical position.
Dry all part thoroughly before storing or using again.
ONE-YEAR LIMITED WARRANTY
7