Craftsman 580.752850 Instrucciones De Uso página 14

PRODUCT SPECIFICATIONS
PressureWasherSpecifications
Outlet Pressure ............... 1700 PSi (117.2 BARS)*
Flow Rate ....................... 1.3 GPM (4.9 LPM)*
Detergent Mix ................. See MFR's instructions
Water Supply Temperature.... Not to exceed IO0°F (38°C)
Motor ........................ Universal (brush) Type
RatedVoltage .......................... 120 Volts AC
Current ................................. 12.5 Amps
* This pressure washer is rated in accordanceto the
Pressure Washer Manufacturers Association (PWMA)
standard PWl01 (Testing and Rating Performance of
Pressure Washers).
OWNER'SRESPONSIBILITIES
GeneralRecommendations
Regular maintenancewiii improve the performance and
extend the life of the pressure washer. See any Sears or other
qualified service dealer for service.
The pressure washer warranty does not cover items that have
been subjected to operator abuse or negligence. To receive
full value from the warranty, the operator must maintain
pressure washer as instructed in this manual including
proper storage as detailed in Storage.
Before EachUse
1. Cleandebris.
2. Checkwater inlet screen for debris or damage.
3. Check high pressure hose for leaks.
4. Checkspray gun operation.
PRESSURE WASHERMAINTENANCE
Clean Debris
Daily or before use, clean accumulated debris from electric
pressure washer. Inspect cooling air slots and openings on
the front, rear and bottom of the electric pressure washer.
These openings must be kept clean and unobstructed.
The electric pressure washer parts should be kept clean to
reducethe risk of overheating and ignition of accumulated
debris.
• Use a damp cloth to wipe exterior surfaces clean.
NOTICE Improper treatment of the electric pressure washer
can damage it and/or shorten its life.
• DONOT insert any objects through cooling slots.
14