Lcd Display - Intellinet 561242 Guía De Instrucciones Rápida

24-Port Gigabit Ethernet PoE+ Switch with 2 SFP Ports
This guide presents the basic steps to set up and operate this device. For detailed
instructions and specifications, refer to the user manual enclosed with this product
or at intellinetnetwork.com.
Placement
Prior to use, it is recommended that the switch be placed/positioned:
• On a level surface that can support the weight of the switch
(and any other items that need to be considered);
• With a minimum of 25 mm (approx. 1") of clearance on the top and sides
for adequate ventilation;
• Away from sources of electrical noise: radios, transmitters, broadband amplifiers, etc.;
• Where it cannot be affected by excessive moisture.
The switch includes brackets and screws for optional rack mounting.
1. Disconnect any cables from the switch.
2. Position a bracket over the mounting holes on one side of the switch and secure it in place
with screws.
3. Repeat Step 2 on the other side of the switch.
4. Position the switch in the rack and screw the brackets to the rack.
5. Reconnect any cables.
Connections
• All ports on the switch support Auto-MDI/MDI-X functionality, so you can use straight or
crossover UTP/STP cables to connect the RJ45 ports to PCs, routers, hubs, other switches,
etc.
• Use the included power cable to connect the receptacle on the back of the switch to a
power outlet, and confirm that the Power LED lights.

LCD Display

The Intellinet 24-Port Gigabit Ethernet PoE+ Switch with 2 SFP Ports is equipped with an
LCD status screen on the front that provides real-time power information. This includes how
much power each connected PoE device consumes, the combined used-power total of all
connected devices and the total power available. Additionally, the LCD screen informs users
of potential warnings for overload, high temperature, short-circuit protection and others.
2
English
English