Master Section - Audiolab Live AN12 Manual De Usuario

3. MASTER SECTION

16. Stereo Graphic Equalizer
2X7-band equalizer is provided for tone control
over each frequency, and for precise high quality
sound by final tone control.
17. Phantom Power Switch/LED
Depressing this switch applies 48VDC across all
microphone input channels connectors for remote
powering of condenser microphones. The LED will
be runed on when phantom power start working.
18. Outputs Level Indicator
Condition on the way of operation. Therefore, you
can see output condition thru this master level
indication.
19. Power LED
The POWER LED will be turned on when start
working.
19.1. Main to Mon Switch
This switch routes the stereo L/R Main Mix and
DROUP signal to both the Monitor and Phones
outputs when there are no solo switches engaged.
The L/R Main Mix signal is overridden in the Mon-
itor and Phones out puts by any PFL solo. NOTE:
If a PFL solo switch is engaged, including Main To
Mon/Phones.
20. FX Level
Using by this control, you can adjust signal level of
echo repeat & exterior effect.
P. 6
AUDIOLAB LIVE AN12 -
English version
16
21. Output Main Fader
This is a master fader for adjustment for volume
of left/right output. Unity gain is the top their
travel.
22. 9/10 VOLUME
Using by this control, you can adjust signal level
of 9/10(mp3).
23. HI(high)
You can adjust of 9/10 channel. See the "6.HIGH".
24. Low
You can adjust of 9/10 channel. See the "8.LOW".
25. Aux Return
This is used of adjusting volume of echo AUX
17
18
19
19.1