POWER
•
•
•
START/
•
PAUSE
•
•
TIME
Press
/
SETTING
BEFORE FIRST USE
Before use, thoroughly wash all parts that will come into contact with the ice cream (including the
removable bowl, blender blade, transparent lid, measuring cup and scoop)
USING YOUR ICE CREAM MAKER
•
Place the removable bowl, with ingredients, into the machine (Fig 1).
For fastest results ingredients should be pre-chilled.
•
Rotate the bowl until it locks into position (Fig 2).
•
Fix blender blade to machine insuring that the blade connects well with the motor axis (Fig 3).
1
•
Fit the transparent lid onto the machine and lock into place.
•
Press the [POWER] button. The LCD will display "60:00".
•
Use [TIME SETTING] buttons to set working time (Maximum 60 minutes).
•
Press the [START/PAUSE] button. The blender blade will start to turn. After a short delay the
compressor will start and the bowl will start to chill.
•
When the machine is running you can increase/decrease the operating time by pressing the
[TIME SETTING] buttons.
•
You can stop the machine at any time by pressing the [START/PAUSE] button.
•
You can add ingredients during operation by opening the transparent lid.
•
If produce becomes frozen blade will stop turning. Switch off the machine
immediately to protect blade motor.
•
To avoid overflow and waste please make sure that the ingredients do not
exceed 60% of the capacity of the removable bowl (ice cream expands when
being formed)
CM289_ML_A5_v2_170616.indb 5
After power up, the machine enters standby mode.
Press the [Power] button to enter the setting mode, and LCD will display
"60:00".
Press the [Power] button during setting mode, the machine will enter the
standby mode again.
After setting the time, press this button to start the working mode.
During operation, by pressing this button, the mixing and the time
countdown will pause.
Press this button again to continue the previous unfinished operation.
to decrease working time, and press
2
UK
to increase working time
3
2017/6/16 17:42
5