Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Operation

Manual Control
The manual controls for the
Revillusion
are located on the right-
TM
front leg of the log grate.
Power
Press to turn the flame effect on
and activate the previous heat
setting (Off, Low, or High). Press
again to put the unit in standby
mode.
Heat
• Heat On
Press to set the heat to Low
(indicated by 1 short beep).
Press again to set the heat
to High (indicated by 2 short
beeps).
• Heat Off
Press to turn heat Off (indicated
by 1 long beep).
!
NOTE: After the heater is
switched off, the fan will continue on
for 60 seconds before turning off.
!
NOTE: Heater will only turn on
when the flame effect is on.
360
Light
o
Press multiple times to change
the LEDs on the sides and back
of the unit from white flickering to
white solid to Off. (This feature is
active only when the flame effect
is On.)
Brightness
Press multiple times to toggle
the log set LEDs through its four
brightness settings.
9

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Revillusion rlg25fc

Tabla de contenido