Publicidad
Idiomas disponibles
Idiomas disponibles
PWS 3045/PWS 3050
ASSEMBLY INSTRUCTIONS
Unpack carefully the contents of the carton
Step 1: put the motor on the rear grill, assembly the blades and front grill
Step 2: Fix the supporting plate and frame
Step 3: Insert the fan head on supporting plate
Step 4: Mount the curved piece with the screws on the wall
Step 5: Insert the winding pipe on the supporting plate and then can put fan on the wall
WALL MOUNTED
-Place the wall bracket. For that,, mark and make 4 holes using the support as a template. Then fix the
support with the supplied screws and dowels.
- Place the hook on the bracket fixing the screws well.
- Finally, attach the fan and secure it firmly by tightening the rear screw
INDICATIONS
- Using the remote control buttons. Select the function required. The remote control requires
2×AAA batteries.
- To switch on use the remote control power 'ON/OFF' button and press the 'SPEED' button to select the
airflow required (low, medium, high).
- To oscillate fan, with power on, press the remote control SWING
- The timer can be set from 0.5 hr to 3.5 hrs using the 'TIMER 'button on the remote control. The timer
increases in half-hourly increments each time the button is pressed.
CARE, CLEANING & STORAGE
The fan blade and grill set should be cleaned regularly for most efficient operation. Unplug the fan,
•
then reserve the assembly procedure to remove those parts from the motor assembly before cleaning.
Wipe with a damp cloth then towel dry.
11
Publicidad
