Removing And Reinstalling The Oven Door - Samsung NX60 87 S Serie Manual Del Usuario

Removing and reinstalling the oven door

How to remove the door
CAUTION
• The door is very heavy. Be careful when removing and lifting the door. Do not
lift the door by the handle.
• Turn the power OFF before removing the door.
1. Open the door completely.
2. Pull the hinge locks down toward the door frame to the unlocked position.
Hinge lock
Locked position Unlocked position
about 5°
Fig. 1
Fig. 2
NX60T8711SS_AA_DG68-01220A-00_EN.indd 45
3. Firmly grasp both sides of the door at
the top.
4. Close the door to the door removal
position, which is approximately
5 degrees from vertical (Fig. 1).
5. Lift the door up and out until the hinge
arms are clear of the slots (Fig. 2).
How to reinstall the door
1. Firmly grasp both sides of the door at the top.
2. With the door at the same angle as the removal position, slide the indentations
of the hinge arms into the bottom edges of the hinge slots. The notches in each
hinge arm must be fully inserted into the bottoms of each slot.
Bottom edge of slot
Hinge arm
Indentation
3. Open the door fully. If the door will not open fully, the indentations are not
inserted correctly in the bottom edges of each slot.
4. Push the hinge locks up against the front frame of the oven cavity into the
locked position.
Hinge lock
Locked position Unlocked position
5. Close the oven door.
English 45
3/26/2020 9:01:05 PM