(Voice recognition) * Network connection is
required to use the voice recognition function.
(Voice recognition) button.
1 Press the
2 Speak when the voice display window appears
on the TV screen.
(Home) Accesses the Home menu.
* Shows the previous history.
Scrolls through the saved channels.
Displays the set-top box Home menu.
(When you are not watching with a set-top box:
the set-top box screen is displayed.)
C
(up/down/left/right) Press the up,
down, left or right button to scroll the menu.
Wheel (OK) Press the center of the Wheel
button to select a menu. You can change channels
by using the Wheel button.
Returns to the previous screen.
* Clears all on-screen displays and returns to
TV viewing.
Displays the program event according to
time scheduler.
Used for viewing 3D video. (For 3D models)
(INPUT) Changes the input source.
* Pressing and holding the
displays all the lists of external inputs.
(Q. Settings) Accesses the quick settings.
* Pressing and holding the
displays the All Settings menu.
, ,
,
Control buttons for media contents
Shows information on the current program.
Color buttons These access special functions in
some menus.
(
Red,
Green,
You can zoom in on the area where the
remote control is pointed.
* By zooming in on the selected area,
you can view it in full screen.
* : To use the button, press and hold for more than
3 seconds.
(INPUT) button
(Q. Settings) button
Yellow,
Blue)
Registering Magic Remote
How to Register the Magic Remote
To use the Magic Remote, first pair it with your TV.
1 Put batteries into the Magic Remote and turn the
TV on.
2 Point the Magic Remote at your TV and press the
Wheel (OK) on the remote control.
• If the TV fails to register the Magic Remote, try
again after turning the TV off and back on.
How to Deregister the Magic Remote
/
Press the
and
at the same time, for five seconds, to unpair the
Magic Remote with your TV.
• Pressing and holding the
let you cancel and re-register Magic Remote at
once.
Licenses
Supported licenses may differ by model.
For more information about licenses,
visit www.lg.com .
Open Source Software Notice
Information
To obtain the source code under GPL, LGPL, MPL,
and other open source licenses, that is contained in
this product, please visit http://opensource.lge.com .
In addition to the source code, all referred license
terms, warranty disclaimers and copyright notices
are available for download.
LG Electronics will also provide open source code
to you on CD-ROM for a charge covering the cost
of performing such distribution (such as the cost of
media, shipping, and handling) upon email request
to opensource@lge.com . This offer is valid for three
(3) years from the date on which you purchased
the product.
(Home) buttons
button will
11