Publicidad
Installation Instructions/Instrucciones de Instalación
LOCKNUT
-
FLOAT
+
5. Set length of pins on flush buttons in the tank
lid. Adjust so that buttons initiate flush when
pressed.
a. Loosen lock nut and adjust length of pins by
threading in or out.
b. Once desired length is attained tighten lock
nuts.
6. Replace cover on tank.
NOTE: The amount of water used in the low volume
flush can be adjusted.
Move the float up on the notched shaft for less
volume and down on the shaft for more volume.
6
LACAVA LLC
Publicidad
