Ce Declaration Of Conformity - Facom NS.1600F Manual Original

PLACING THE MACHINE IN SERVICE
Always use of an air line lubricator with these machine. We recommended the
following Filter-Lubricator-Regulator Unit: FACOM N.580.
Every eight hours' operation, if a lubricator is not used on the compressed air
network, inject 1/2 to 1cm through the machine's inlet connection.
3
Model Square Impact
drive
''
NS.1600F 1/2
Model Free speed
rpm
NS.1600F 10000
* k = measurement uncertainty in dB
WE, FACOM S.A.S., 6/8 RUE GUSTAVE EIFFEL - BP 99 - 91 423 MORANGIS CEDEX FRANCE, DECLARE UNDER OUR OWN RESPONSIBILITY THAT THE
PRODUCT NS.1600F – FACOM 1/2" AIR IMPACT WRENCH
- IS IN CONFORMITY WITH THE «MACHINERY» DIRECTIVE 2006/42/CE
- AND IS IN CONFORMITY WITH THE PROVISIONS OF THE HARMONISED EUROPEAN STANDARD,
ISO 12100:2010
ISO 11148-6:2012
ISO 15744:2008
ISO 28927-2:2009
LUBRIFICATION
• BEFORE EACH OPERATION, CHECK:
- Only use suitable FACOM sockets and flogging spanner accessories, (''IMPACT'') as well as
safety devices, bush and pin for mounting one of these cases on a drilled driving
square.
- The drive square condition (no marks, cracks or excessive wear).
- The condition of the safety devices (bush and pin) on the drilled square as well as the draw
bead on the non-drilled square.
Maximum
rate Torque
Pressure dB(A)
N.m
1650 861 91,1
Air consumption
l/min
127
** k = measurement uncertainty in m/s²

CE DECLARATION OF CONFORMITY

Noise level
Power dB(A)
k* k*
3 108,1
Working pressure Weight
bar kg
6,2 1,3
EMERGENCY
GATE VALVE
Pressure dB(C)
k*
3 < 130 3
Dimensions
mm
111x61,5x173
F
ACOM QUALITY MANAGER
Vibrations
level
m/s
2
k**
9,57 1,44
10.12.2015