Lynx LM15REF Cuidado Y Uso / Instalación página 12

SHELVING CONFIGURATIONS
CAUTION
!
Never try to move a loaded shelf, remove everything from
the shelf before moving. Use both hands when moving the
shelf.
Installed shelf
tang
Rear tang
(hook) on
shelf
Figure 19a
up and remove the shelf from the
12
CARE AND USE/INSTALLATION
Shelf support
slot
Grasp the shelf by the front with
both hands and rotate the front
of the shelf up, then lift the shelf
shelf ladders.
To Add or Remove a Shelf
Remove stored product from the shelf. Do not try to remove
a loaded shelf from the appliance. Grasp the shelf front with
both hands, rotate the front upward and lift out. (See Figure
19). To install a shelf insert the shelf in the appliance and
insert the top hooks into the shelf support slots and drop
the shelf down so the hooks drop over the bottom of the
slots.
CAUTION
!
Make sure your cantilever shelf is secure on the shelf sup-
ports by pressing down on the shelf before loading.
Figure 19